Patient_Submit

TENS 3000

Our Analog TENS units are among the easiest to use of our Stimulator Line. TENS technology has never been more accessible and easy to use as with our TENS 3000 Analog Units.

For patients who may not be experienced or comfortable with digital technology, then the analog unit is a perfect fit. Each package includes 1 TENS 3000 Analog unit with LIFETIME WARRANTY, 1-9 volt battery, Starter packs of electrodes and lead wires. Everything you need to start relieving the pain immediately. AC adapters are available upon request. Each unit comes complete with a Patient Data Card and Letter of Medical Necessity to expedite the process.

WARNING: This is a Class II Medical device and Federal law Restricts this device to sale by or on the order of a Physician.
Detailed Description

  • Channels: Dual Channel, isolated between channels
  • Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel.
  • Voltage: 0 – 50V (Load: 500 ohm)
  • Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step
  • Pulse Width: Adjustable, from 50 to 300 microseconds, 10uS/step
  • Wave Form: Asymmetrical Bi-Phasic Square Pulse
  • 5 Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration), SD2
  • Burst Mode: Burst rate: Adjustable, 0-5 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz
  • Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
  • Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300S) are fully adjustable.
  • The SD1(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300S) are fully adjustable.
  • The SD2(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300S) are fully adjustable.
  • Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours.
  • Timer: Adjustable, from 5 to 60 minutes or Continuous. Adjustable in 5 minutes each step. Treatment time countdown automatically.
  • Lifetime Warranty
  • System Includes: Stimulator, Lead Wires, 2 packages of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.
top

More Images

top

Ready to order?

order-now